TM Net Streamyx ZTE ZXDSL 831 ADSL Modem
The ZTE ZXDSL 831 is a modem/router supplied
by Telekom Malaysia when you subscribe to TM Net Streamyx packages that
come with modem.
It works as a modem by default but you can
configure it to become a router.
In router mode, you don’t need to dial to login to Streamyx anymore. The
router will dial it for you automatically.
Configure to Router mode
Login to http://192.168.1.1 with the username and password
username : ADSL
Note: “03" read “zero three”.
username : ZXDSL
If you cannot logon using the user name and password combinations
provided above, you may need to
reset the modem by long-pressing the ‘reset’ button to the default
When logged in, click on the WAN tab.
- Under the WAN tab, select PPP and
then select ADD to add in a new PPP configuration as follow:
PPP Interface = ppp-0
ATM VC = aal5-2 or equivalent ( VPI=0, VCI=35 setting)
Interface Sec Type = Public
Status = Start
Protocol = PPPoE
Use DHCP/DNS = Enable
Security Protocol = PAP
Login Name = yourname@streamyx
Password = your password
- Under the Services tab, select NAT,
and set it to Enable.
- Under the Services tab, select IP
Filter, make sure the Public and Private is set to Accept, and this
would allow the modem to access the Net.
After that, click on “Admin” and then “Commit” and then “Reboot”.
- Set every PCs TCP/IP in your LAN to
point to the modem as the gateway.
IP Address = 192.168.1.x ( where x ranges from 2-254)
Subnet mask = 255.255.255.0
Default Gateway = 192.168.1.1.
Preferred DNS Server = 184.108.40.206
Alternate DNS Server = 220.127.116.11
- Once it’s done you should check your Internet connectivity by loading
your favourite website.